Site Map | Home
Installing Custom Solar Battery Charging Systems on Recreational Vehicles in the Denver Metro Area
Drop Down Navigation Menu Goes here - Remove Center Alignment

Rocking the RV industry with their Patent Pending Dual Tilt Solar Panel Mounting System!

RV Solar Connection, llc (RVSC) has developed a revolutionary dual tilt solar module mounting system designed for Kyocera KC65T, KC85T, KC130TM, KD135, KD140 and the new line of KD145 solar modules.

Visit our sister site RVSolarStore.com to order our Dual Tilt solar panel mounts.

The unique design of these mounts makes them easily adaptable to most manufactures solar modules. RVSC dual tilt mounts are easy to install on RV's with flat or nearly flat roofs.

RVSC Dual Tilt Mounts are made in the USA and available in two sizes:

RVSC Dual Tilt Mounts can also be installed on any type of out building. The mounts are easily installed on side walls, roofs or fences. They also make a great set of support legs for our portable solar charging systems.

RVSC Dual Tilt Mounts are now available for the do-it-your-self installer as a complete per module kit... or in 16 packs for dealer distribution.

The Patent Pending RVSC Dual Tilt Mount is hands down the best recreational vehicle solar panel mounting solution available on the market!

Tilted RV Solar Panels

RVSC Medium Dual Tilt RV solar panel mounts tilt from 0 degrees to 56 degrees with out tools or extra parts.

Modules shown in flat stowed positionPictured left: The above KC130TM modules mounted length wise shown in flat summer or stowed travel position.

Once installed the RVSC Dual Tilt Solar Panel Mounts require no tools or extra parts to tilt the solar modules. It only takes one person a couple of minutes to tilt each module.

The RVCS medium dual tilt mounts have a tilt range from 0° (flat) to 56°. Sufficient for most North American latitudes.

 

Manufactured from heavy duty grade 5052 aluminum.

Fabrication of RVSC Dual Tilt Solar Module MountsRVSC Dual Tilt Mounts are manufactured from flat sheets of 1/8" 5052 grade aluminum. 5052 is a high strength, high fatigue aluminum alloy capable of withstanding road vibration while traveling.

With excellent corrosion resistance the RVSC dual tilt mounts can easily handle the adverse conditions that solar modules are exposed to.

Greater versatility when parking the RV. Dual Tilt Mounts allow you to tilt solar modules in two directions.

When mounted length wise with the RV (pictured below) the RVSC Dual Tilt Mounts can be tilted to either curb side or street side of any recreational vehicle. If installed cross wise the modules can be tilted to the front or to the rear of the RV.

Who says you have to mount all of your module the same direction!
You can track the sun by mounting modules in different directions on your RV. For example lets say one always parks his RV with curb side facing south. Early in the morning the sun comes up in the east and at the end of the solar day the sun sets far to the west. One module could be installed so that the panel could be tilted east in the morning then west to capitalize on late day sunshine.

RVSC Dual Tilt mounts tilted in opposite direction

Pictured above: These are the same modules pictured at the top of the page but tilted the opposite direction. The AC unit will partially shade two of the modules but it is doubtful the owner will ever tilt his modules street side.

RVSC Dual Tilt Mounts are quite versatile and easy to install! Read more about the RVSC Solar Dual Tilt RV Mount.

The RVSC Dual Tilt Solar Pane Mounts can be ordered on line via PayPal
RVSC Dual Tilt Mounts are made in Colorado, USA:
RVSC Medium Dual Tilt Mounts: $119.00 per set
RVSC Large Dual Tilt Mounts: $125.00 per set

What's in the RVSC Dual Tilt Mounts box?
One set (2 each) top and bottom mounting rails. One set mounts one module.
2 pivot arms
6 -1/4-20 UV and heat resistant Phenolic knobs
4 -1/4-20 x 5/8" Stainless steel bolts. (For mounting module to mount)
4 - 1/4 Stainless flat washers (For mounting module to mount)
4 -1/4-20 serrated lock nuts (For mounting module to mount)
Installation/Owners manual
Medium mount is fully assembled in concealed hardware configuration.
Large mount is partially assembled in concealed hardware configuration.
Installer needs to purchase roof fasteners and sealant

Currently our tilt able solar panel mounts only operate on RV's with flat or nearly flat roofs. Shimming is required on curved roofs.

 

Related Pages
Dual Tilt RV Mounts
Benefits of Tilt Mounts
Installation Options
Dual Tilt Mount Solar Module Compatibility

Retail Pricing
One set installs one module
Medium $119.00 per set
Large $125.00 per set

Order Medium Dual
Tilt RV Solar Panel Mounts
Via our Sister Site
RV Solar Store

Order Large Dual
Tilt RV Solar Panel Mounts
Via our Sister Site
RV Solar Store

Downloads
Installation Manuals

RVSC Medium Mount PDF
RVSC Large Mount PDF Gif

Module Compatibility
Medium Mount PDF Gif
Large Mount PDF Gif

Converting to Exposed Hardware Configuration
Exposed Hardware Manual PDF Gif

Medium Mount Specs
Length: 25.625"
Width: 1.5"
Width at Knobs: 2 3/8"
Weight: 3.1 lbs
Ship Weight. 4.2 lbs
Mounts to modules with mounting holes from 15.38" to 24.38" apart

Large Mount Specs
Large mount coming soon
Length: 26.313"
Width: 3"
Width at Knobs: 2 3/8"
Weight: 4.6 lbs
Ship Weight: 5.7 lbs
Mounts to modules with mounting holes from 16 1/8" to 25.5" apart

RVSC Dual Tilt RV Solar Panel Mounts are made
in the USA!

American Flag

Dealer Inquiries
Contact: randy @ rvsolarconnection.com